10G SFP+ BIDI 80km
10G SFP+ BIDI 80km 1550T/1490R
Macrochip MCS-3NDBCC-80-54 transceivers is a hot pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require rates up to 11.1Gb/s, compliant with SFF-8472 SFP+ MSA. The transmission distance is up to 80km over single mode fiber.
Features
- Support multi-protocol from 8.5Gb/s to 11.3Gb/s
- Hot-Pluggable SFP+ footprint
- 1550nm EML laser transmitter
- APD Receiver
- Up to 80km on 9/125μm SMF
- Single +3.3V Power Supply
- Compliant with SFF-8431 SFF-8432 and IEE802.3ae
- Low power dissipation <2W typically
- Commercial operating temperature range: 0°C to 70°C
- RoHS compliant
10G SFP+ BIDI 80km 1490T/1550R
Macrochip MCS-3NDBCC-80-45 transceivers is a hot pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require rates up to 11.1Gb/s, compliant with SFF-8472 SFP+ MSA. The transmission distance is up to 80km over single mode fiber.
Features
- Support multi-protocol from 8.5Gb/s to 11.3Gb/s
- Hot-Pluggable SFP+ footprint
- 1490nm EML laser transmitter
- APD Receiver
- Up to 80km on 9/125μm SMF
- Single +3.3V Power Supply
- Compliant with SFF-8431 SFF-8432 and IEE802.3ae
- Low power dissipation <2W typically
- Commercial operating temperature range: 0°C to 70°C
- RoHS compliant
FAQ
Q: If the link goes down, how can I quickly determine if it's a module issue or a fiber line problem?
A: You can utilize the modules' built-in Digital Diagnostic Monitoring (DDM) functions. Access the port information on your network device. If the Transmit Power is normal but the Received Power is very low or nonexistent, the issue likely lies with the far-end module or the fiber line (e.g., broken fiber, tight bend, dirty connector). If the local Transmit Power reading is abnormal, the module itself might be faulty. This is a powerful troubleshooting tool.
Q: What about the power consumption and thermal performance? Could they overheat in a high-density switch?
A: You can be assured. These modules are designed for high efficiency with a typical power dissipation of less than 1.5W, which is relatively low for 10G long-reach optics, resulting in manageable heat output. Even in a fully loaded, high-density chassis, overheating is typically not a concern provided the equipment itself has adequate airflow and cooling design.
Q: In what real-world networking scenarios would I specifically need this 80km BIDI pair?
A: This pair is the ideal solution for scenarios combining long-distance needs with scarce fiber resources. Classic applications include connecting two campus or data center sites dozens of kilometers apart when only one fiber strand is available in the conduit, or providing 10G access for multiple sites in a Metro Area Network (MAN) without laying new fiber pairs for each link, resulting in significant infrastructure savings.
Q: Can they be used in outdoor cabinets or industrial environments?
A: Yes. This series offers an Industrial temperature grade version (operating from -40°C to 85°C), specifically designed for environments without strict climate control, such as outdoor access points or wireless base station backhaul. Please select the appropriate temperature grade based on your actual deployment environment.
Our Factory
Macrochip invested 350 million RMB to build a 3500 square meter cleanroom facility in Quanzhou, China, which includes over 100 sets of various instruments and equipment. It can perform various processes such as chip testing, die attach or die bonding, wire-bonding, alignment, burn-in, module ASSY, and module testing. Macrochip has an annual production capacity of 200,000 high-speed optical modules.
Hot Tags: 10g sfp+ bidi 80km, China 10g sfp+ bidi 80km manufacturers, suppliers, factory
Send Inquiry
